Jokisch Fosia Skim B.M

Old productname: Bandoilscimmer

Bandscimmer for continuous or periodic removal of tramp oil and floating contaminants. This prevents bacteria growth to a large extent and increases the life of coolants considerably. The annoyance to the machine operator of bad odours and vapour generation is reduced substantially


  • Application
  • Safety instructions
  • Technical Data
  1. skimmer should only be attached to the coolant reservoir, when the coolant has been in an unagitated state for 2 hours or longer, so that tramp oils for separation have definitely collected on the surface.
  1. Attach the oil skimmer to the coolant reservoir so that the band is submerged at a depth of 10 to 40 mm in the liquid. The 2 joints give you a multitude of adjustment possibilities. The drain pipe with hose should always be sloped downwards slightly to ensure reliable skimming of the tramp oils. The collection container should have sufficiently large dimensions.
  1. Either the machine can be switched on directly at the power supply or with the plug-in connector on the housing. You have the option of setting the voltage on the power supply in steps from 3 to 12 volts. The speed increases as the voltage gets higher. It is best to begin with level 6 (12 volts) when switching on, because the friction forces are still relatively high. After only a few revolutions, the voltage and therefore the revolutions per minute can be adjusted down to level 1 (3 volts), because the oil skimmer produces its best results at the slowest speed.
  1. The period of use will depend largely on the volume of tramp oil. (It usually takes between 2 and 12 hours.) Longer operating times (e.g. at the weekend) are by all means possible provided you have a large enough collection container, so that inadvertent spilling is prevented.

Protect the plug-in mains adaptor (220 V) from being splashed with water.

Where possible avoid the band from becoming jammed. Do not touch the band with your hand during operation. If there is a large quantity of floating foreign material (plastic shavings, etc.), blockages can occur, which may cause a larger quantity of coolant to be skimmed off or a blockage in the drain pipe. This can be avoided by making regular inspections and cleaning as required. Do not clean the band with liquids containing solvents. CE mark present

(Subject to technical alterations)

  • Band width: 50 mm
  • Band length: 850 mm
  • Rated voltage: 3-12 V
  • Submersion depth: 10-180 mm
  • Capacity:approx. 4 litres of leak oil per hour
Buying options

Please login to order this product

User login

Enter your username and password here in order to log in on the website